Pat Mooney PMI-18 MITER UPCUT SAW

Pat Mooney PMI-18 MITER UPCUT SAW

Contact us for price

orCall 832-509-1089

Description

The Pat Mooney PMI-18 is a semi-automatic upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).


7.5 HP Saw Motor:

The strong drive system via 7.5 HP saw motor allows for maximum cutting force and chip removal.  This additional power extends the life of the saw blade between regrinds

Upcut Design and Saw Blade Chamber:

The PMI-18CD is an Upcut saw. The saw blade is housed under the work table and travels up through the work piece. This has several advantages such as safety (less blade exposed during cut), chip removal and longer blade life

Precision Ground Work Table with Special Surface Coating:

The work table is a ground surface and is coated with a special Chromate coating which prevents marring the outside of your work piece.


Material Clamping:

The pneumatic clamping system has adjustable clamping pressure to prevent distortion of thin wall profiles. The top clamp holds the work piece on both sides of the saw blade to deliver a burr free cutoff part. The clamp is controlled by its own cylinder and has adjustment according to the size of the work piece.


Saw Blade Feed:

The saw blade feed is controlled via a pneumatic cylinder with full control of the feed rate. This will allow for accurate cuts and long blade life.  In addition, the saw blade travel is controlled for fastest cycle time






Specifications

ManufacturerPat Mooney
ModelPMI-18 UPCUT SAW
ConditionNew
Saw Motor7.5 HP
Straight Cut Saw90 Degree Only
Saw Blade Speed3200 RPM
Full Control of the Feed RateAir over Oil Feed System
Diameter Saw Blade18"
Maximum Sawing Height4.33"
Maximum Sawing Width11.81"
Table Size26-1/3"x26"
Working Height33-7/8" Inch
Machine Dimensions34” x 35” x 66”
MachineWeight770 LBS

Additional Features

Additional Standard Items included with purchase of the PMI-18:
• Tool Kit
• Kanefusa 120T Saw Blade
• Operating Manual

Cutting Capacity
Round-90 Degree 5.905”
Round-45 Degree 5.511”
Square-90 Degree 5.905”
Square-45 Degree 5.511”
Rec a x b-90 Degree 5.511 x 7.874”
Rec a x b-90 Degree 5.905 x 4.724”
Rec a x b-90 Degree .393 x 13.188”
Rec a x b-45 Degree 5.905 x 3.543”
Rec a x b-45 Degree 5.511 x 5.118”
Rec a x b-45 Degree .393 x 9.448”