Marvel Amada Spartan MSIW126D/DX

Marvel Amada Spartan MSIW126D/DX

Contact us for price

orCall 832-509-1089

Description

Amada Marvel Spartan Ironworker

  • Heavy-Duty
  • Dual Cylinder
  • Completely Integrated
  • 126 Ton Capacity
  • 15 H.P.
  • D 14” Throat
  • DX 24″ Throat
  • 5 Work Stations
  • Simultaneous Dual Operation


Standard Work stations

  1. Punching Station Punch station, Round and Square bar station, Angle shear station, 45 degree angle station, Flat bar shear station, Notching station, Central lubrication pump, Electric backgauge (Standard with Dual Cylinder machines), work light. Optimize your viewpoint with Marvels new LED workstation lighting. Whether punching, shearing or notching, these lights deliver when precision matters.
  2. Punch Die Holder.The various machines punch from 1/8" to 2" in diameter. Punching from 2-1/16" to 4" is achievable with usage of the oversize attachment feature. Punches and dies are easily interchangeable. Both round and shaped tools can be used in the machine.
  3. Punch Table
  4. Bar shearing Station.With the bar shearing feature, rounds and squares can be cut from 1/8" to 2-1/8" (Larger sized holes are available on larger machines only). By changing the blades you can also cut T-bars, H-beams, and channel iron.
  5. Angle Shear .The angle shearing feature allows the option to cut angle iron at 90 degrees, and smaller angle iron at 45 degrees. This feature can be done with both the top and bottom leg. 
  6. Flat Bar Shear.Complete daily flat bar shearing with flat and precise results, complimented by the unique anti-distortion blade
  7. Notching Station.Notching needs are met with a rectangular notching tool, standard on each machine. Marvel can provide special notching tools for a variety of desired applications.


Specifications

ManufacturerMarvel Amada
ModelSpartan MSIW126D/DX
ConditionUsed
Work Stations5
Punching Pressure126 Tons
Standard Tooling1-1/2"x1"
Large Tooling2"x3/4"
Oversized Tooling4-5/16 x5/16"
Throat DepthD: 14" DX: 24"
Stroke Length3-1/8"
Cycle/ Min 3/4"25
Work Height37"

Additional Features

PUNCHING PRESSURE 126 Tons
PUNCH WORK TABLE Includes back gauge and adjustable stops
ADJUSTABLE SEE-THROUGH PUNCH STRIPPER For fast and easy setup.
DIE HOLDER Adjustable in machined T-slots for quick punch and die alignment.
STANDARD TOOLING 1-1/2" in 1" material
LARGE TOOLING 2" in 3/4"
CPD SERIES SP51P punch, SP80D die
OPTIONAL OVERSIZE TOOLING 4-5/16" in 5/16" material
THROAT DEPTH 14” (D); 24” (DX)
STROKE LENGTH 3-1/8”
CYCLES PER MINUTE IN 3/4" 25
PUNCHING STATION WORK HEIGHT 43-3/4”
‍ ‍
FLAT BAR SHEARING
FLAT BAR SHEAR CAPACITY 14” in 1”
MAXIMUM WIDTH X THICKNESS 24” x 9/16”
LOWER BLADE Four usable edges
SUPPORT TABLE Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right,
ADJUSTABLE HOLD-DOWN Holds work piece securely in position when shearing.
UPPER SHEAR BLADE Provides for minimum distortion. Two usable edges.
BLADE LENGTH 24"
ANGLE FLANGE TRIM 5" in 5/8"
FLAT BAR SHEAR WORK HEIGHT 37"
‍ ‍
ANGLE SHEARING
MAX. CAPACITY - 90 DEGREES 6" x 6" x 5/8"
MAX. CAPACITY - 45 DEGREES 3" x 3" x 3/8"
SHEAR BLADES Four usable edges
ANGLE SHEAR WORK HEIGHT 48"
‍ ‍
BAR SHEARING
ROUND BAR CAPACITY 2”
SQUARE BAR CAPACITY 2” x 2"
SIX CAVITY ROUND BAR SHEAR SIZE 3/4", 1-1/2", 2"
SIX CAVITY SQUARE BAR SHEAR SIZE 1-1/4" to 2"
CHANNEL SHEAR 7"
I-BEAM 7"
BAR SHEAR WORK HEIGHT 48"
‍ ‍
NOTCHING
RECTANGULAR NOTCHER 2-3/8" x 4" x 1/2"
GAUGE TABLE WITH STOPS For precise positioning
NOTCHER WORK HEIGHT 37"