ERMAKSAN SpeedBend SB (8'53-110ton)

ERMAKSAN SpeedBend SB (8'53-110ton)

orCall 832-509-1089


SPEED-BEND Synchronized Hydraulic Press Brake

The Bend series have been designed to reduce the unit time costs and to be your most important power in your business with its fast and quality production capability in a competitive environment. Movement range of the upper beam and the daylight opening have been increased in the Speed Bend Pro series. Thus, the user is provided as a standard with the possibilities of obtaining deep bends by use of longer dies, taking the bent parts easily from the front side of the machine and easily bending the Z type parts with long boarder by use of high bottom tools.

Realistic 3D modelling

Low energy consumption

Easy service by remote access

Quick and easy tool replacement

Customer focused ergonomic solutions

Backgauge with servo motor


ModelSpeedBend SB (8'53-110ton)
Stock NumberSB 3760175
Bending length8''
Bending power110 Ton
Distance Between Columns102"
Y Rapid Speed7.09"/SEC
Travel In X Axis31.50"
Speed of X Axis19.69/ IN/S
Travel In R axis9.84 INC
Back Guage Finger Blocks2
Gallons oil52
Hp Motor14.75
Machine DimensionsL 147.64" W 110.24" H 76.77"

Additional Features

Standard Equipment
Mono block, welded steel frame rigid to deflection and high tensile with ST44 A1 material.
6 axes (Y1, Y2, X, R, Z1, Z2)
Back gauge system with X, R, Z1, Z2 axis driven by AC servo with colored graphics.
HOERBIGER servo hydraulic system.
CNC controlled motorized anti-deflection system.
Hardened and ground standard sectioned top and 4V-Die bottom tools (835 mm section).
Easy to clamp tool holding system with upper and lower tools.
Standard graphic controllers can be selected from: ER-90 Plus 3D colour graphical touch screen controller with offline software, Cybelec ModEva 15T 3D colour graphics with PC-ModEva offline software, Delem DA-66T 2D with colored graphics.
Electrical panel with cooling system designed to meet CE standards and composed of automation and electrical equipment with SIEMENS branding.
Ergonomic user friendly, pendant control panel.
Back light safety guards (category-4)
Front side covers with safety switches.
Synchronization of Y1+Y2 axis provided by linear encoders with 0,01 mm tolerances.
Foot pedal suitable to CE regulation.
Sliding front support arms with T slot and mm/inch rulers.
Throat depth 410 mm.

• Graphical control units;
• 5, 6 axes back gauge options
• LEUZE light protection system
• DSP MCS AP photo electric laser front protection
• Laser angle measurement system
• Hydraulic and hydro-dynamic crowning systems
• Pneumatic top tool holder system
• CNC controlled automatic bending sheet support arms (AP3+AP4 axes)
• Hydraulic oil cooling and heating systems
• Automatic sliders lubricating system
• Special throat depths (500, 600 and 750 mm and above)
• Tool storage cabinet
• Led bar